design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc C eee-35 C a0.2 w l ( ) reference size 0 d0.5 h b0.2 (i) k (p) (i) + C 0.3 max. pressure relief ( 0 10 and larger) ' $ k capacitance (f) rated voltage mark series identi?cation lot number negative polarity marking (C) mark for lead-free products black dot (square) features endurance : 105 c 1000 h low impedance (1/2 for ha series) vibration-proof product is available upon request. ( 0 8 mm and larger) aec-q200 quali? ed ? rohs directive compliant surface mount type series: fc type: v specifi cations category temp. range C40 c to +105 c rated w.v. range 6.3 v.dc to 50 v.dc nominal cap. range 1 f to 1500 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.01 cv or 3 (a) after 2 minutes (whichever is greater) tan d please see the attached standard products list characteristics at low temperature w.v. (v) 6.3 10 16 25 35 50 (impedance ratio at 120 hz) z(C25 c) / z(+20 c) 2 2 2 2 2 2 z(C40 c) / z(+20 c) 3 3 3 3 3 3 endurance after applying rated working voltage for 1000 hours at +105 c2 c and then being stabilized at +20 c, capacitors shall meet the following limits. capacitance change 20 % of initial measured value tan d < 200 % of initial speci? ed value dc leakage current < initial speci? ed value shelf life after storage for 1000 hours at +105 c2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci? ed in endurance.(with voltage treatment) resistance to soldering heat after re? ow soldering and then being stabilized at +20 c, capacitor shall meet the following limits. capacitance change 10 % of initial measured value tan d < initial speci? ed value dc leakage current < initial speci? ed value di men sions in mm (not to scale) marking example:6.3 v 22 f marking color : black size code d l a, b h i w p k b 4.0 5.4 - 0.2 4.3 5.5 max. 1.8 0.650.1 1.0 0.35 - 0.20 c 5.0 5.4 - 0.2 5.3 6.5 max. 2.2 0.650.1 1.5 0.35 - 0.20 d 6.3 5.4 - 0.2 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 - 0.20 e 8.0 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 0.35 - 0.20 f 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2 g 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2 + 0.15 + 0.15 + 0.15 + 0.15 + 0.1 + 0.1 + 0.1 ha fc low impedance frequency (hz) 50, 60 120 1 k 10 k 100 k to correction factor 0.70 0.75 0.90 0.95 1.00 frequency correction factor for ripple current j 6.3 v a 10 v c 16 v rated voltage mark e 25 v v 35 v h 50 v (unit : mm) ? this product qualify for aec-q200, but it has some deviations. 01 mar. 2014
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc C eee-36 C standard prod ucts w.v. cap. (20 %) case size speci? cation part no. (rohs:compliant) re? ow min. packaging q'ty dia. length size code ripple current (10 0 khz) (+105c) tan d (120 hz) (+20 c) impedance (10 0 khz) (+20 c) taping (v) (f) (mm) (mm) (ma r.m.s.) ( )(pcs) 6.3 22 4 5.4 b 60 0.26 3.00 eeefc0j220r (1) 2000 47 5 5.4 c 95 0.26 1.80 eeefc0j470r (1) 1000 68 6.3 5.4 d 140 0.26 1.00 eeefc0j680p (1) 1000 100 6.3 5.4 d 140 0.26 1.00 eeefc0j101p (1) 1000 220 8 6.2 e 230 0.26 0.40 eeefc0j221p (2) 1000 330 8 10.2 f 450 0.26 0.30 eeefc0j331p (2) 500 1000 10 10.2 g 670 0.26 0.15 eeefc0j102p (2) 500 1500 10 10.2 g 670 0.26 0.15 eeefc0j152p (2) 500 10 33 5 5.4 c 95 0.19 1.80 eeefc1a330r (1) 1000 100 8 6.2 e 230 0.19 0.40 eeefc1a101p (2) 1000 150 8 6.2 e 230 0.19 0.40 eeefc1a151p (2) 1000 220 8 10.2 f 450 0.19 0.30 eeefc1a221p (2) 500 470 10 10. 2 g 670 0.19 0.15 eeefc1a471p (2) 500 1000 10 10.2 g 670 0.19 0.15 eeefc1a102p (2) 500 16 10 4 5.4 b 60 0.16 3.00 eeefc1c100r (1) 2000 22 5 5.4 c 95 0.16 1.80 eeefc1c220r (1) 1000 47 6.3 5.4 d 140 0.16 1.00 eeefc1c470p (1) 1000 68 8 6.2 e 230 0.16 0.40 eeefc1c680p (2) 1000 100 8 6.2 e 230 0.16 0.40 eeefc1c101p (2) 1000 2 2 0 10 10. 2 g 670 0.16 0.15 eeefc1c221p (2) 500 3 3 0 10 10. 2 g 670 0.16 0.15 eeefc1c331p (2) 500 470 10 10. 2 g 670 0.16 0.15 eeefc1c471p (2) 500 6 8 0 10 10. 2 g 670 0.16 0.15 eeefc1c681p (2) 500 25 6.8 4 5.4 b 60 0.14 3.00 eeefc1e6r8r (1) 2000 22 6.3 5.4 d 140 0.14 1.00 eeefc1e220p (1) 1000 33 6.3 5.4 d 140 0.14 1.00 eeefc1e330p (1) 1000 47 8 6.2 e 230 0.14 0.40 eeefc1e470p (2) 1000 68 8 10.2 f 450 0.14 0.30 eeefc1e680p (2) 500 100 8 10.2 f 450 0.14 0.30 eeefc1e101p (2) 500 2 2 0 10 10. 2 g 670 0.14 0.15 eeefc1e221p (2) 500 3 3 0 10 10. 2 g 670 0.14 0.15 eeefc1e331p (2) 500 470 10 10. 2 g 670 0.14 0.15 eeefc1e471p (2) 500 35 145.4b600.123.00 eeefc1v1r0r (1) 2000 2.2 4 5.4 b 60 0.12 3.00 eeefc1v2r2r (1) 2000 3.3 4 5.4 b 60 0.12 3.00 eeefc1v3r3r (1) 2000 4.7 4 5.4 b 60 0.12 3.00 eeefc1v4r7r (1) 2000 6.8 5 5.4 c 95 0.12 1.80 eeefc1v6r8r (1) 1000 10 5 5.4 c 95 0.12 1.80 eeefc1v100r (1) 1000 22 6.3 5.4 d 140 0.12 1.00 eeefc1v220p (1) 1000 33 8 6.2 e 230 0.12 0.40 eeefc1v330p (2) 1000 47 8 6.2 e 230 0.12 0.40 eeefc1v470p (2) 1000 10 0 10 10. 2 g 670 0.12 0.15 eeefc1v101p (2) 500 2 2 0 10 10. 2 g 670 0.12 0.15 eeefc1v221p (2) 500 3 3 0 10 10. 2 g 670 0.12 0.15 eeefc1v331p (2) 500 50 1 4 5.4 b 30 0.12 5.00 eeefc1h1r0r (1) 2000 2.2 4 5.4 b 30 0.12 5.00 eeefc1h2r2r (1) 2000 3.3 4 5.4 b 30 0.12 5.00 eeefc1h3r3r (1) 2000 4.7 5 5.4 c 50 0.12 3.00 eeefc1h4r7r (1) 1000 10 6.3 5.4 d 70 0.12 2.00 eeefc1h100p (1) 1000 22 8 6.2 e 120 0.12 0.70 eeefc1h220p (2) 1000 33 8 10.2 f 300 0.12 0.60 eeefc1h330p (2) 500 47 10 10.2 g 500 0.12 0.30 eeefc1h470p (2) 500 100 10 10.2 g 500 0.12 0.30 eeefc1h101p (2) 500 220 10 10.2 g 500 0.12 0.30 eeefc1h221p (2) 500 please refer to the page of re? ow pro? le and the taping dimensions. when requesting vibration-proof product, please put the last v instead to p endurance : 105 c 1000 h 01 mar. 2014
|
